|
|
|
Table Saw & Saw Blade Accessories
Crown molding miter jig, vertical panel saw or home-built panel
saw plans & kit, folding tool stand, miter saw laser guide, table saws and
table saw fence systems, Porter-Cable
compound miter saw, tenon jig, Gr 200 Grr-ripper, sliding table, cutting guides, Bosch jigsaw kit, master plate,
right angle miter gauge, Power Twist link belt, Incra Miter Sled, blade
organizer, featherboards, Jessem
Mite-R-Excel™ Miter Gauge and many other useful items for the
woodworking shop.
Table Saw Accessories
Provides a minimum of 48" of support past the blade for
large panels and long boards - easily balance an 8' long panel after it's
been ripped
Significantly reduces dangerous blade jams, binding, and kickbacks
Lifts quickly into position and locks with a single motion - Just lift up on
the outboard end of the rollers and the special folding support arm drops
into position
Provide ample support for up to 200 lbs
Features unique 2-position cam action to place the rollers flush with your
table saw surface or under your miter gauge (fixture) guide bar
26" wide and fits 10" Cabinet Saws with Sliding Tables
Contains 2 columns of rollers
Quickly set-up, tune up, and check the accuracy of your shop's tools
with these systems. Check table saw blade and fence alignment,
arbor and blade runout, miter slot to blade squareness,
arbor/chuck runout, jointer/planer head to table parallelism,
jointer/planer knife alignment, outfeed table alignment;
router/shaper spindle runout, or any other set up or alignment
measurement you desire.
Tired of leaning over trying to "see light" between a square and your
table saw blade to get exact 90 or 45 degree cuts? Need 22.5 degrees for
that curio cabinet corner? Now it's easy to achieve perfect pre-set stops or
set your saw for any angle in between.
The Blade Organizer is a great product that will organize,
protect and store all your expensive saw blades. Made in the USA, from
extremely durable molded plastic the Blade Organizer will hold up to 12
blades, with each blade stored in an individual sleeve in the slotted
compartment. The starter kit comes with 3 sleeves for 10″ blades, 2 sleeves
for 71/4″ and 1 multi-sleeve for reciprocating and jig saw blades.
Make fast, accurate adjustments in less than .001" increments to your T-
square style table saw fence.
Allows for precise dadoes and a perfect fit every time.
Three powerful rare earth magnets hold adjuster securely on front
rail.
Mounts and dismounts in seconds without tools.
|  |
Positive stops at 0º, 10º, 22-1/2º, 30º and 45º — and micro-adjustability
to 1/100º — give you speed, repeatability and the same accuracy that
machine shops strive for!
Add to that the perfect, repeatable dimensions you’ll get from
the precision flip stop, and you can say “goodbye” to mitered joint gaps
forever.
|
 |
|
|
This jig allows you to rip thin strips on the left side of the blade, eliminating
the danger of pushing narrow strips between the saw and fence. Since the
strip is not trapped between the blade and fence, there is also less risk of
binding and kickback. It’s simple to use; a single knob locks the jig into the
miter track and locks your setting at the same time. Ball bearing guide keeps
your workpiece firmly against the fence for perfect repeatability. Use the
graduated scale to fine-tune for extremely thin strips.
Note: Ripping thin strips requires the use of a zero-clearance insert.
Guard and splitter were removed here for illustration purposes only.
|  |
 |
Cut custom coves on your table saw without juggling all
those fences and clamps! This jig includes everything you need for safe,
easy coving in one easy-to-use package. Accepts stock up to 7" wide and
1-1/2" thick, enabling you to cut huge crown moldings that would cost a
fortune from the lumberyard. Try angling the blade for a truly unique shape.
Ingenious clamping system secures the fences using the 3/4" miter slots on
the saw table. Large, easy grip knobs make for quick, tool-free setups.
Included featherboard kit holds stock firmly to the table for added safety,
precision and repeatability.
|
Saw Blade Accessories
 |
Versatile and rugged anodized aluminum extrusion works well with various woodworking machines to ensure accuracy.
Allows you to cut materials with more speed and repeatable precision than ever before...Features
self-aligning L-shaped mounting foot for easy installation to top side of a
shop-made 3/4" thick fence.
|
The ultimate miter cutting workstation for the table saw!
Three-panel miter sled with patented Incra incremental angle
control delivers perfect, repeatable accuracy.
Includes 36"-64" telescoping miter fence and dual flip stop.
With 364 precision indexed angle stops over +/-90º to produce
perfect, gap-free miter joints on any multi-sided object.
|  |
|
Upgrade any miter gauge to a miter sled in seconds!
Makes cutting multiple pieces with precision a snap.
Safely doubles any miter gauge’s crosscut range up to 24" and
eliminates all side play to improve your miter gauge’s performance.
True zero-clearance tearout control on both sides of the table.
Works with any brand of miter gauge. Miter gauge not included.
Miter
Express Video Demo
|  |
100 EZ Smart Guide System includes: Two 50" guides with
anti-chip edges; guide connectors; Universal Smart Base; hardware; 2 pairs of
anti-splintering inserts; and two Smart Clamps. Smart Base fits works with all
right blade circular saws including Bosch, Skil, Dewalt, Black Decker,
Porter-Cable, Makita, Hitachi, Ryobi, Craftsman, Ridgid, and most others.
|
The Red-Line Cutting Guide is an excellent straight guide for circular
saws, routers, and jig saws. Measuring 55" long by itself, and whopping 110"
long with the optional extension, it even handles oversize stock with ease.
Tools contact the guide more completely when starting cuts, and stay on it
longer, so entry and exit cuts are cleaner and more accurate. Rugged 3" wide
solid aluminum "I-beam" construction ensures that it will stay straight,
without deflecting.
|
Most feather boards don't work in odd holding situations. This one guides
your work piece firmly and safely. It grabs on steel or iron tables with
80-pound strength, in any position and at any angle. Just set it in place -
holds work both sideways and down. USA
|
Heavy-duty design provides exceptional rigidity and accuracy through the
cut. Quick and easy fence adjustability with solid brass lock knobs. Miter gauge
pivots 45º in both directions and allows you to index positive stops every 1/2
degree.
Separate vernier scale allows additional angle settings to 1/10 degree.
Heavy-gauge 24" extruded aluminum fence extends to 36" overall.
|
This customizable stock control jig has multiple non-slip grooved pads to
provide real gripping power for feeding stock on your table saw, router table,
jointer, or shaper. It encloses stock to protect hands and fingers, and prevent
kick-back. It tightly holds both sides of the stock parallel to the blade
throughout the operation, enabling you to cut so straight you can use it to
joint smooth edges on a table saw. Rip stock as narrow as 1/4". Cross-cut and
re-saw with accurate repeatability.
 |
Covers over 30 applications of the GRR-Ripper system on four different machines: table saw, router, jointer and band saw.
120 minutes...
|
The Lumber Wizard provides powerful, yet precise detection of metal objects
imbedded in both new and used lumber. The large scanning area makes inspection
of stock an extremely quick process. Sensitive to a wide variety of metals
including steel, stainless steel, zinc, magnesium, and aluminum. Detects a 3"
piece of metal up to 6" deep, a large deck screw up to 4" deep, a med. nail up
to 2-1/2", and a small wood staple up to 1-1/4" deep. Requires 9 volt battery
(not included). Has vibrations alert for use in noisy shops.
|
|
The first zero-deflection straight edge clamping guide! Provides you with
straighter and more accurate cuts, dadoes and routing without additional
clamps.
New and improved design features:
30% wider integral clamping jaws for tighter clamping and less
marring of wood.
50% wider locking lever for quick, easy clamping of guide.
Full-color measuring scale with large numbers (in 1/4").
|
 |
• Diamond Blades & Wheels •
• Freud Blades •
• Popular Blades •
• Popular Blades Pg 2 •
• Schumacher Saw Blades •
• Table, Radial & Miter Saw Blades •
• Table Saw Blades •
• Table Saws •
Thanks for shopping here.
Come again.
|
HTC Outfeed Roller, Model HOR-1026U
A-LINE-IT Systems
Wixey Digital Angle Gauge
Blade Organizer
EZ
Smart Guide System
Red-Line
Cutting Guide
Magnetic
Featherboard
Jessem
Mite-R-Excel™ Miter Gauge
Gr
200 Grr-ripper
Lumber
Wizard III Metal Detector