Wood Lathe Chucks, Live Centers, Drivers and Lathe Duplicator
Oneway and Stronghold woodworking chucks, live centers, 1/2" chucks, lathe duplicator and cast iron wood lathe faceplates.
Oneway
Talon Chuck & Spindle Adapters
The superior design and performance of the Talon self-centering, 4-jaw scroll chuck permits turning with greater speed, accuracy and safety. This snappy little chucking system will take care of the majority of turning duties on any size lathe, but is ideal for lathes with a 16" swing or less. Single-hand key operation and smooth-glide, zig-zag base jaw design make this one of the easiest of all chucks to operate.
Stronghold
Chuck
The best and beefiest of Oneway's scroll type chucks. This is the choice of
world-class turners! Suitable for square or round work. Precision made with a
super holding power. If you create bowls, vessels, and other specialty turnings,
you'll find this chuck to be a joy to use.
4-Jaw Turning Chuck | |
Independently adjustable jaws allow you to lock in square
or odd-shaped stock. Stepped jaws can also be reversed for added
versatility. Stepped jaws can also be reversed for added versatility.
|
 |
Cole Jaw Set
These versatile jaws of sturdy 3/8" thick cast aluminum with a 10" diameter have the same basic configuration as the smaller 25mm and 50mm units and can expand into a 95-117mm (3-3/4"-4-5/8") dovetailed recess, or clamp the outside of a turned dovetailed foot 84-104mm (3-5/16"-4-1/8") in diameter.
Space the 8 rubber stoppers in any of 8 diameter
positions on the face of the collet plates to finish the bottom of a bowl up to
10" in diameter.
For larger bowls the stoppers may grip from the inside as the chuck expands
outward.
Any of your own custom made wooden plates may be applied.
Taper
Live Center Kit
This is the most versatile live center available, with quality built in through and through. Has a universal threaded cup center with replaceable center point, a bull nose cone to accommodate inside and outside turnings, a full point cone (perfect for candlestick turnings), and a knockout tool. Body is precision machined from alloy steel, heat treated, ground, and nickel plated, with two lifetime lubricated bearings. Canada.
Taper
Safe Driver
This drive center is a perfect for the beginning turner. Helps teach proper turning technique because a catch or excessive tool pressure stops the spindle from turning. Has quick change applications for production turners too. Replaceable center point. Canada
Taper
Spur Driver
This high quality Morse Taper Spur Driver lets you get a no-slip grip on turning stock. Has four aggressive spurs, plus a replaceable center point which can be adjusted to protrude at the proper length for your application. Made from premium quality carbon steel. Canada.
1/2"
Chuck, #1 or #2 Morse Taper
Use this chuck in your lathe anytime you need to grab small parts, or to replace the worn out one on your drill press. All working parts are hardened and ground while each chuck features a pointed nose for extra clearance. Chuck key included. Be sure to order the proper morse taper arbor for your machine. China
Wood Lathe Chucks - Good Selection
Face Plates | |
These heavy-duty cast iron face plates have a 1'' by 8 TPI right-hand threaded. Mount the plates to a wide variety of lathe spindles just by changing the threaded insert. They fit Delta, Jet and other lathes. Great for small to medium sized projects.
|
 |
Lathe Duplicator | |
Create precise duplicates of spindles, table legs, and other turned projects. This Lathe Duplicator attaches easily to almost every floor-model lathe. The hand wheel allows for smooth operation while cutting. Will duplicate to a maximum length of 39'' (depending on the lathe used) with a maximum duplication depth-of-cut to 2-3/8''. Suitable for lathe with a turning diameter of 12'' to 20''. Includes high-speed steel cutter. |  |
VEGA Lathe Duplicators
For anyone who has to make more
than a single turned object, duplicators are almost essential to a good
job—most tables, for example, look more professionally done when all the
legs match. If you're making a production run of pens for advertising or
other purposes, getting them as close to alike as possible, and doing the
job as fast as possible, is important.
VEGA duplicators remove stock faster than all but the most experienced
woodworkers can, while keeping within very tight tolerances (if the
workpiece is heavy enough to not deflect, up to 1/2" can be removed per
pass). It works off a template, and can easily work off an original turning
(with a 2" maximum turning diameter). Most small-scale lathe duplicating
machines do not work well, are poorly made, and the cutters are cheap, often
hard or impossible to sharpen, and difficult to replace. And the duplicators
will fit only a single machine. VEGA has changed all that. Their three Lathe
Duplicators cover mini and midi lathes, and full-sized lathes with swings up
to 16". A narrow diamond shaped HSS cutter is included with each duplicator
and replacement cutters are available.
Related pages you may find useful:
•
•
•
•
•
•
•
•
•
Thanks for shopping here. Come again.